Italy FLAME CUTTING MACHINE

Category:

ItalyWelding machinery

2632888@vip.163.com

Inquire

Product Description

PRODUCT INTRODUCTION

Using servo motors as the driving force and utilizing the transverse torque characteristics of servo motors, the cutting machine can maintain a constant speed at any position on the track; This model has a simple structure, easy and fast installation, high transmission torque, and smooth operation; The body material is hard aluminum alloy, with a small volume and light weight. The track is made of elastic steel, so it can be coiled into a small disk, significantly reducing its volume and weight compared to other rigid tracks. Convenient to carry and

transport; Adopting an integrated servo motor with comprehensive protection functions. Such as overload protection, overcurrent protection, etc; This machine adopts a design where the control box is separated from the vehicle body, making it easy to operate; The cutting machine controller uses a large capacity lithium battery as a power source. Eliminate the hassle of connecting to the mains power on site; The overall voltage of the machine is 24VDC, completely avoiding the risk of electric shock for on-site construction personnel; The whole machine is equipped with a dedicated battery fast charger. Charging power from 5% to 100% only takes 3 hours; The whole machine achieves fast installation. The elastic track is quickly fixed using a lever mechanism; The cutting trolley adopts a linkage mechanism for quick clamping; The cutting cart is connected to the controller using high-quality cables, and

the connector uses a waterproof quick plug joint; Automatic cutter, suitable for cutting pipes of various diameters (customized for special diameter tracks); Including the body, track, cutting torch, control box,and connecting cables, the body is universal for tracks of different diameters, and only the top rod and track need to be replaced; Can improve efficiency, ensure cutting quality, and reduce labor intensity

PERFORMANCE PARAMETER

弹性轨道式火焰切割机
充电电压	AC100V--240V(专用充电器)
充电电压	50HZ或60HZ
工作电压	直流24V
额定功率	100W
伺服电机工作电压	直流24V
伺服电机调速模式	模拟量速度模式
电池类型	三元锂动力电池
电池容量	9000mAH
行走速度	0—1100 mm/min
火焰切割厚度	6—125mm
坡口切割角度	0±45°
切割模式	火焰切割
燃气	乙炔/丙烷、氧气
燃气压力	最大0.05Mpa
火焰切割速度	0—600 mm/min
割炬行程	200mm
适应管径	最小273— ∞
连续运行时间	连续行走距离约250米 (以1219mm管径为例：可连续切割60道口)